The Scaltrol unit, a dispenser of polyphosphate, provides protection against all mineral scale and staining.
The Scaltrol unit may be fitted on hot or cold waterlines. Water pressure for effective dispensing of Scaltrol should not exceed 100 psi and a check valve must be installed before the Scaltrol unit. Care must be taken to prevent the unit and waterline from freezing. The top of the unit must be fitted in a horizontal position. This will ensure proper dispensing of Scaltrol into the water system.
A replacement cartridge (RSC-500) should be ordered when the Scaltrol compound is near the bottom of the cartridge.
*SC-500 Specifications
| Waterflow Max. Pressure Head & Sump Max. Temperature Head & SumpDimensions |
0 - 25 GPM 100PSI 150°F (66°C)7.5" wide & 14" tall |
|
Suggested Installation Diagram
P. O. Box 609
Norcross, Georgia 30091
6350 Regency Parkway
Suite 530
Norcross, Georgia 30071
Toll Free: 800-868-0629
877-769-2751(fax)
Local: 678-990-0858
678-990-0862 (fax)
*Scaltrol, Inc. reserves the right to make changes in design and/or specification without prior notice. 2006